News

Product Attributes Model No.:14.5X9.5cm The disposable ear-hanging medical mask consists of a mask body, a nose clip, and a mask belt; the product has a three-layer structure, the middle layer is made of melt-blown cloth, and the remaining two layers are made of non-woven fabric. It is worn by various clinical personnel during non-invasive operations, covering the mouth, nose and jaw of the user, and providing a physical barrier to prevent the direct penetration of pathogenic microorganisms and particles. Please check if the package is damaged and within the validity period. If the package is damaged or exceeds the validity period, it is prohibited to use it; open the package, take out the mask, and open the wrinkled part of the mask. The white layer is the inner surface, and the other colors are the outer surface. The nose clip is gently pressed to make it fit better on the face. Masks should be replaced in time when they are contaminated or suspected of being contaminated. Please replace the product after four hours of use.

Disposable medical self-adhesive wound dressings are produced in a 100,000-level clean workshop. The product is mainly composed of adhesive tape, absorbent pad, and release paper. The products are produced by fully automatic production equipment. The four sides of the application are neat, without burrs, and the surface should be clean and flat, free of damage, stains, and uniform color; the product quality is excellent. Our company's products have been sold all over the country and received unanimous praise. The main purpose of the product is: for surgical, traumatic wounds or indwelling arteriovenous catheters; it can also be used for infant umbilical cord wound protection. This product should be used within the validity period of the product. It is forbidden to use it when the package is damaged. Keep away from fire and flammable materials. It should be used for one time. This product is sterilized by ethylene oxide. Marketed in aseptic form. The product should be stored away from fire, and stored in a warehouse with a relative humidity of less than 80%, dry, well-ventilated, clean, and non-corrosive or harmful gas.

Disposable airflow atomizers are produced in a 100,000-level clean workshop. Type A1 and Type A2 are composed of catheters, universal joints, atomizing devices, and masks. The product should be sterile. After sterilization by ethylene oxide, the residual amount of ethylene oxide should not exceed 10ug/g. One-time use. The company has advanced production equipment, production technicians have more than ten years of production experience, and the quality of the products produced is relatively excellent. The main purpose of the product is: clinically, oxygen is used as a power source to atomize liquid medicines for patients to inhale and treat. This product should be used within the validity period of the product. It is forbidden to use it when the package is damaged. Keep away from fire and flammable materials. It should be used for one time. This product is sterilized by ethylene oxide. After sterilization, it will be analyzed in the forced analysis room. Marketed in aseptic form. The product should be stored away from fire sources, and stored in a warehouse with a relative humidity of less than 80%, in a dry, well-ventilated, clean and sanitary, and non-corrosive or harmful gas.

The one-time use of tracheal intubation is produced in a 100,000-level clean workshop. This product is divided into non-cystic type and cystic type. The non-cystic type endotracheal tube consists of a tube body and a machine end connector; the cystic type endotracheal tube consists of the tube body , Inflatable tube, cuff, joint and inflation valve. The product should be sterile. After sterilization by ethylene oxide, the residual amount of ethylene oxide should not exceed 10ug/g. One-time use. The company has advanced production equipment, production technicians have more than ten years of production experience, and the quality of the products produced is relatively excellent. The main purpose of the product is: for the establishment of artificial airway during clinical anesthesia or first aid. This product should be used within the validity period of the product. It is forbidden to use it when the package is damaged. Keep away from fire and flammable materials. It should be used for one time. This product is sterilized by ethylene oxide. After sterilization, it will be analyzed in the forced analysis room. Marketed in aseptic form. The product should be stored away from fire sources, and stored in a warehouse with a relative humidity of less than 80%, in a dry, well-ventilated, clean and sanitary, and non-corrosive or harmful gas.

The disposable band-type medical mask is composed of a mask body, a nose clip, and a mask belt; the product has a three-layer structure, the middle layer is made of melt blown cloth, and the remaining two layers are made of non-woven fabric. It is worn by various clinical personnel during non-invasive operations, covering the mouth, nose and jaw of the user, and providing a physical barrier to prevent the direct penetration of pathogenic microorganisms and particles. Please check if the package is damaged and within the validity period. If the package is damaged or exceeds the validity period, it is prohibited to use it; open the package, take out the mask, and open the wrinkled part of the mask. The white layer is the inner surface, and the other colors are the outer surface. The nose clip is gently pressed to make it fit better on the face.

Disposable medical isolation masks are produced in a 100,000-level clean workshop. Type II isolation masks are composed of protective covers made of polymer materials, foam strips and fixing devices; isolation masks should be clean, free of stains and dirt; should be complete , There should be no damage; the mask sheet should be smooth, free of burrs or scratches, and the color should be transparent. It should be clearly visible when wearing it. The main production equipment of this product is an injection molding machine. The company has advanced production equipment. The production technicians have more than ten years of production experience, and the quality of the products produced is relatively excellent. The main purpose of the product is: non-sterile provision, one-time use. It is used as a protective function during inspection and treatment in medical institutions, blocking body fluids, blood splashing or splashing. This product should be used within the validity period of the product. It is forbidden to use it when the package is damaged. Keep away from fire and flammable materials, and use it for one time. The product should be stored away from fire sources, and stored in a warehouse with a relative humidity of less than 80%, in a dry, well-ventilated, clean and sanitary, and non-corrosive or harmful gas.

Disposable medical paraffin wax balls are produced in a 100,000-level clean workshop. This product is made of cotton balls soaked in liquid paraffin. The surface of the paraffin wax balls is clean, free of stains, impurities, and uniform in size; the single package of paraffin wax balls should The seal is firm and there must be no leakage. The main purpose of the product is: clinically used to lubricate the medical tube body and play a lubricating effect. The paraffin cotton balls are sterilized by cobalt-60, and the products are marketed in aseptic form. This product should be used within the validity period of the product. It is forbidden to use it when the package is damaged. Keep away from fire and flammable materials, and use it for one time. The product should be stored away from fire, and stored in a warehouse with a relative humidity of less than 80%, dry, well-ventilated, clean, and non-corrosive or harmful gases.

Disposable medical isolation shoe covers are produced in a 100,000-level clean workshop. The main raw material of type II is non-woven fabric, and the weight of non-woven fabric is not less than 18 grams. The surface of the isolation shoe cover should be clean, uniform in color and non-woven. No stains and no damage. This product is produced using a heat-sealing production process, and heat-sealing strips are used to heat-press the joint; the hot-pressed part should be firm, evenly bonded, without seams, and burnt; the shoe cover is closed with elastic bands; the main purpose of the product is : Used by medical staff in medical institutions to prevent contact with potentially infectious patients' blood, body fluids, secretions, etc., and play a blocking and protective role. This product should be used within the validity period of the product. It is forbidden to use it when the package is damaged. When using it, carefully put the shoe cover on the foot, and then gently lift the upper end of the shoe cover to make the shoe cover and the trouser leg well sealed; keep away from fire and flammable It is a one-time use; this product has good water resistance and good surface moisture resistance, and good protection. The product should be stored away from fire sources, and stored in a warehouse with a relative humidity of less than 80%, in a dry, well-ventilated, clean and sanitary, and non-corrosive or harmful gas.

Disposable medical orifice towels are produced in a 100,000-level clean workshop. The holes of type II orifice towels are round holes and are processed by non-woven. The product is cut according to the order size on the stainless steel worksheet. After the cutting is completed, the holes are cut according to the model, and then folded neatly, packaged and sealed in a 100,000-level packaging workshop; the main purpose is: clinical prevention of cross-contamination use. This product should be used within the validity period of the product. It is forbidden to use it when the package is damaged. Keep away from fire and flammable materials. It should be used for one time. This product is sterilized by ethylene oxide. It is marketed in sterile form; our company uses better non-woven fabrics for production. Non-woven fabrics have good breaking strength and breaking elongation, and the raw material technology is mature. Many medical consumables on the market use this raw material (Such as masks, pad sheets, etc.). The product should be stored away from fire sources, and stored in a warehouse with a relative humidity of less than 80%, in a dry, well-ventilated, clean, and non-corrosive or harmful gas.

A single-use sterile vaginal dilator is composed of an upper lobe, a lower lobe and a handle. The upper and lower lobe and the periphery of the dilator should be smooth, without sharp edges and burrs. When the upper and lower lobes of the dilator are closed, the contact surface to the outer edge should be smooth. After the product is sterilized by ethylene oxide, it is provided in a sterile form; the main purpose is for vaginal examination in obstetrics and gynecology; the product is divided into pivot type according to the way it opens. This product should be used within the validity period of the product. It is forbidden to use it when the package is damaged. Keep away from fire and flammable materials, and use it for one time. The product should be stored away from fire sources, and stored in a warehouse with a relative humidity of less than 80%, in a dry, well-ventilated, clean and sanitary, and non-corrosive or harmful gas.

Disposable medical cotton swabs are produced in a 100,000-level clean workshop. The product is mainly processed from bamboo sticks (or plastic sticks) and medical absorbent cotton; when disinfecting skin and wounds, the tools for applying drugs or disinfectants are not included. Medication or disinfectant. The products are processed by fully automatic cotton swab machines. The mature technology of this equipment guarantees both product quality and production efficiency; the bamboo sticks are carefully screened by the company's inspectors before use, and the medical absorbent cotton used is by the company's inspectors. It can be put into production only after passing the inspection, and the product quality is well guaranteed. Our company's products have been sold all over the country and received unanimous praise. The main purpose of the product is: to apply disinfectant to the skin, mechanical wounds and instruments of the surgical or puncture site. This product should be used within the validity period of the product. It is forbidden to use it when the package is damaged. Keep away from fire and flammable materials, and use it for one time. The product should be stored away from fire sources, and stored in a warehouse with a relative humidity of less than 80%, in a dry, well-ventilated, clean and sanitary, and non-corrosive or harmful gas.

One-time use medical gynecological bags are produced in a 100,000-level clean workshop. The aborted gynecological bags are made up of disposable medical pads, disposable medical orifice towels, medical degreased gauze blocks, disposable surgical gowns and disposable sterilized rubber surgical gloves. Basic configuration, medical cotton swabs and disposable medical rubber examination gloves are optional; the components in the gynecology bag should be clean, free from damage, stains, etc.; its main purpose is: use in clinical gynecological abortion; the product uses ethylene oxide After sterilization, analysis is carried out in the compulsory analysis room, and the products are marketed in aseptic form. This product should be used within the validity period of the product. It is forbidden to use it when the package is damaged. Keep away from fire and flammable materials, and use it for one time. The product should be stored away from fire sources, and stored in a warehouse with a relative humidity of less than 80%, in a dry, well-ventilated, clean and sanitary, and non-corrosive or harmful gas.

The disposable isolation garment produced by our company uses non-woven fabric as the main raw material and is made by cutting, sewing/heating. Non-sterile provision, single use. Our company has advanced production equipment, and production technicians have more than ten years of production experience, and the quality of the products produced is relatively excellent. Disposable gowns have complete certificates, low prices, high quality products, and factory direct sales. The main purpose of the product is: for general isolation in medical clinics, wards, and inspection rooms. This product should be used within the validity period of the product. It is forbidden to use it when the package is damaged. Keep away from fire and flammable materials, and use it for one time.

Disposable medical protective masks are composed of a mask body (including nose clips) and a mask belt; the mask body has a three-layer structure, and the middle layer is a filter layer made of polypropylene meltblown cloth. , The other layers are made of spunbonded non-woven fabric. The main purpose is: for filtering particles in the air, blocking droplets, blood, body fluids, and secretions in a medical working environment. Please check if the package is damaged and within the validity period. If the package is damaged or beyond the validity period, it is prohibited to use; open the package, take out the mask, open the mask in the direction of the marked opening, gently hang the mask strap on both ears, and wear the mask Press the nose clip lightly to make it better fit the face; this product is sterilized with ethylene oxide, and then analyzed in a forced analysis room after sterilization. The product is marketed in a sterile form. Masks should be replaced in time when they are contaminated or suspected of being contaminated. Please replace the product after four hours of use. The company adopts all-in-one mask machine production and ultrasonic welding technology. The mask adopts a three-layer process, which has a better protective effect, and the product quality is stable and reliable. The product should be stored away from fire, and stored in a warehouse with a relative humidity of less than 80%, dry, well-ventilated, clean, and non-corrosive or harmful gas.

The disposable medical rubber examination gloves are made of natural rubber latex. The product has good tensile properties and breaking strength. Product performance meets the performance indicators in GB 10213-2006 "Disposable Medical Rubber Examination Gloves". This product is sterilized by ethylene oxide, and analyzed in the compulsory analysis room after sterilization. The product is marketed in a sterile form; the product instructions and precautions are as follows: the product is processed from natural rubber latex, and it is not available before use. Remove the surface powder under the condition of bacteria; clinically used to prevent cross-infection between patients and users during medical examination and treatment; check the integrity of the small package, if the small package is damaged, please do not use; the product has a two-year lifespan. People who are allergic to natural rubber should not use it. The product should be stored away from fire, and stored in a warehouse with a relative humidity of less than 80%, dry, well-ventilated, clean, and non-corrosive or harmful gas.

The disposable oxygen mask is produced in a 100,000-level clean workshop. This product consists of a mask body, a conversion joint, a nose clip, an oxygen supply tube, an oxygen supply tube joint, and an elastic band. The main production equipment of this product is extruder and injection molding machine. The company has advanced production equipment. The production technicians have more than ten years of production experience, and the quality of the products produced is relatively excellent. The main purpose of the product is: clinical use of oxygen inhalation for children. This product should be used within the validity period of the product. It is forbidden to use it when the package is damaged. Keep away from fire and flammable materials. It should be used for one time. This product is sterilized by ethylene oxide. Marketed in aseptic form. The product should be stored away from fire, and stored in a warehouse with a relative humidity of less than 80%, dry, well-ventilated, clean, and non-corrosive or harmful gas.

Disposable medical absorbent cotton balls are produced in a 100,000-level clean workshop. The product is mainly made of absorbent cotton. Tools for applying drugs or disinfectants when disinfecting skin and wounds. Contains no drugs or disinfectants. The raw materials of the products are strictly checked by the quality inspectors when they enter the factory, and the absorbent cotton is inspected. After the inspection is qualified, the inspection personnel can increase the sampling inspection efforts to prevent the unqualified products from flowing outside the factory. Absorbent cotton balls are processed and manufactured by cotton ball machines. The cotton balls produced by this equipment have a uniform and clean appearance, a fast production speed, and a good guarantee of product quality. Our company's products have been sold all over the country and received unanimous praise. The main purpose of the product is: to apply disinfectant to the skin, mechanical trauma and equipment of the surgical or puncture site. This product should be used within the validity period of the product. It is forbidden to use it when the package is damaged. Keep away from fire and flammable materials, and use it for one time. The product should be stored away from fire, and stored in a warehouse with a relative humidity of less than 80%, dry, well-ventilated, clean, and non-corrosive or harmful gases.

Disposable surgical gowns are produced in a 100,000-level clean workshop. This product is made of non-woven fabric; the non-woven fabric used in this product is non-woven fabric of not less than 40 grams, and the non-woven fabric has good breakage Strength, elongation at break, bursting strength and resistance to microbial penetration; surgical gown cuffs are elastically closed, the heat-sealing part of the surgical gown is flat and firm, and the key parts of the product are the chest and left and right arms. The main purpose is: for the surgical staff to wear, reduce the spread of infection source to the patient's surgical wound to prevent postoperative wound infection. This product should be used within the validity period of the product. It is forbidden to use it when the package is damaged. Keep away from fire and flammable materials. It should be used for one time. This product is sterilized by ethylene oxide. Marketed in aseptic form. The product should be stored away from fire, and stored in a warehouse with a relative humidity of less than 80%, dry, well-ventilated, clean, and non-corrosive or harmful gas.

Disposable medical cotton swabs are produced in a 100,000-level clean workshop. The product is mainly processed from bamboo sticks (or plastic sticks) and medical absorbent cotton. The products are processed by fully automatic cotton swab machines. The mature technology of this equipment not only guarantees product quality, but also guarantees production efficiency; our company's products have been sold all over the country and have received unanimous praise. The main purpose of the product is: clinical dipping to eliminate venom, as a complete skin disinfection. This product should be used within the validity period of the product. It is forbidden to use it when the package is damaged. Keep away from fire and flammable materials. It should be used for one time. This product is sterilized by ethylene oxide. After sterilization, it will be analyzed in the forced analysis room. Marketed in aseptic form. The product should be stored away from fire, and stored in a warehouse with a relative humidity of less than 80%, dry, well-ventilated, clean, and non-corrosive or harmful gas.

The disposable medical treatment towel type II is made of double-layer non-woven fabrics. The non-woven fabrics have certain strength and breaking strength, good tensile properties, and easy to use, safe and reliable. The main purpose of the treatment towel is to prevent cross contamination in the clinic. This product should be used within the validity period of the product. It is forbidden to use it when the package is damaged. Keep away from fire and flammable materials. It should be used for one time. When using this product, place the product flat on the place where the patient needs it, and gently press to prevent the treatment towel. Folds. The product should be stored away from fire sources, and stored in a warehouse with a relative humidity of less than 80%, in a dry, well-ventilated, clean, and non-corrosive or harmful gas.